close
FWS-8600 FWS-8600 | 2U Rackmount Network Appliance with Dual 2nd Gen Intel® Xeon® Scalable Processors

PLATFORM

Form Factor 2U Rackmount Network Platform
processor Dual 2nd Gen Intel® Xeon® Scalable Processors, up to 56 cores, 112 threads
Chipset Intel® C621 Chipset
System Memory DDR4 2133/2400/2666 R-DIMM x 16 (8 DIMM per CPU), Up to 512 GB

NETWORK

Ethernet Intel® i211 Gigabit Ethernet x 2
Bypass Depend on NIM module
NIM Slot NIM x 4 (Project based up to 8 slots)

DISPLAY

Graphics Controller Optional support via Mini-PCIe module or IPMI
Connector Optional VGA port via module

STORAGE

HDD SATA III Port x 6
External Hotswappable 3.5" HDD Bay x 4
Internal 3.5" HDD Bay x 1, option with 2.5" HDD Bay x 2
CF/CFast/mSATA M.2 2260 M-key x 1
mSATA slot x 1 (share same slot with Mini-Card)

EXPANSION/INTERNAL INTERFACE

PCIe Slot Optional PCIe [x16] slots x 2, via riser card
Mini-Card Mini Card slot (full-size) x 1 (PCIe/SATA, USB2.0)
IPMI Optional IPMI via AAEON Module (Project based)
KB Mouse
USB USB 3.2 Gen1 x 2 (Optional 2*10 pin USB 3.2 Gen1 x 2 Box Header 2.0mm)

MISCELLANEOUS

RTC Internal RTC
Watchdog Timer 1~255 steps by software programmable
Software Button GPIO Programmable push button x 1
TPM (Optional TPM2.0 9665 on board)
GPIO (4 bits input, 4 bits output optional)
Fan 5 x Hotswappable FAN
MTBF (hours) 192,691 Hours
Color Black

PHYSICAL & ENVIRONMENTAL SPEC

Power Requirement 550 ~ 600W Redundant Power
Operating Temperature 32°F ~ 104°F (0°C ~ 40°C )
Storage Temperature -4°F ~ 140°F (-20°C ~ 60°C)
Operating Humidity 10%~80% relative humidity, non-condensing
Storage Humidity 10%~80% @40°C; non-condensing
Vibration 0.5 Grms/ 5 ~ 500Hz / operation (3.5” Hard Disk Drive x 5)
1.5 Grms/ 5 ~ 500Hz / non operation
SHOCK 10 G peak acceleration (11 m sec. duration), operation
20 G peak acceleration (11 m sec. duration), non operation
Dimension (W x D x H) 17.48" x 22.83" x3.46" (444mm x 580mm x 88mm)

I/O INTERFACE

Front Panel Power LED x 1
Status LED x 1
HDD Active LED x 1
USB 3.2 Gen 1 Ports x 2
RJ-45 Console x 1
Parallel LCM display and 4 keypad x 1
Software Programmable Button x1
RJ-45 LAN x 2
IPMI x 1 (Project based)
Rear Panel AC Power Input x 2, Power Switch x 1,
VGA port (Optional), Rear Expansion Slot x 2 ( PCIe [x16] Optional)